The strong and versatile alternative wall stop ends.
Capping of internal balustrades, window openings and internal partition wall ends are all made easy using INVI Cap®.
Using a slip-fit fixing method, INVI Cap simply slides onto the end of the plasterboard and doesn’t require preparation to paint in with the rest of the wall, significantly reducing time and effort during installation and presenting a crisp finished wall end.
Available in a variety of profiles including:
- The Original INVI Cap
- Closer Cap for Cavity Sliders
- The Shadowline INVI Cap
- Custom Shapes
FEATURES
Product Advantages
- INVI Cap is available in a range of sizes to suit various wall configurations
- Eliminate cracking on wall ends using the INVI Cap slip fit fixing method
- Custom lengths available
- Reduce compound usage for each stop end using INVI Cap
- Pre-finished surface standard, no extra preparation required for painting
UK & EU Patents 6124629 & 2114339.1
FAQ
INVI Concept products are manufactured from zinc annealed steel and meet the finished surfaces standard AS/NZS 2311:2009 to ensure it can be painted immediately with standard wall paints, without any special preparation, so long as it is free of dust, dirt and oil.
Yes, architraves can be fitted, but the INVI Jamb concept is designed to create an ‘architrave-free’ opening.
Plaster around the edges of the INVI Jamb will not crack if the INVI Jamb is installed according to the installation guide — i.e. must be screwed off every 200mm and double screwed at the hinge points and top corners. INVI Jamb then becomes an integral part of the wall.
Yes, custom made INVI Jambs are available with no header for full height doors.
The manufacturer strongly recommends a timber stud or a 0.75 BMT metal stud on both sides of the opening.
INVI Concept products are manufactured from highest quality zinc annealed cold-formed steel sections.
INVI Jamb frames are not welded and are clipped together using a unique INVI Jamb system that ensures an easy install and smooth finish.
- Key Features
-
FEATURES
As the strong and versatile alternative for stop ends, INVI Cap is an economical way to cap wall ends and prevent damage from wear and tear in high traffic areas over time, keeping masterpiece designs intact for years to come.Product Advantages
- INVI Cap is available in a range of sizes to suit various wall configurations
- Eliminate cracking on wall ends using the INVI Cap slip fit fixing method
- Custom lengths available
- Reduce compound usage for each stop end using INVI Cap
- Pre-finished surface standard, no extra preparation required for painting
UK & EU Patents 6124629 & 2114339.1
- Resources
- FAQ
-
FAQ
Do I have to use any special paint or preparation methods on INVI Concept products?INVI Concept products are manufactured from zinc annealed steel and meet the finished surfaces standard AS/NZS 2311:2009 to ensure it can be painted immediately with standard wall paints, without any special preparation, so long as it is free of dust, dirt and oil.
Can I fit architraves with the INVI Jamb system?Yes, architraves can be fitted, but the INVI Jamb concept is designed to create an ‘architrave-free’ opening.
Will plaster crack around the edges of the INVI Jamb?Plaster around the edges of the INVI Jamb will not crack if the INVI Jamb is installed according to the installation guide — i.e. must be screwed off every 200mm and double screwed at the hinge points and top corners. INVI Jamb then becomes an integral part of the wall.
Can INVI Jamb be used in a doorway with no header?Yes, custom made INVI Jambs are available with no header for full height doors.
What jamb studs do I use for the opening of an INVI Jamb?The manufacturer strongly recommends a timber stud or a 0.75 BMT metal stud on both sides of the opening.
What material are INVI Concept products made from?INVI Concept products are manufactured from highest quality zinc annealed cold-formed steel sections.
Are your frames welded?INVI Jamb frames are not welded and are clipped together using a unique INVI Jamb system that ensures an easy install and smooth finish.
Explore the INVI Concept range
Hinges to perfectly complement INVI Jamb Door Jambs
Custom Riser Doors
Standard access panels
Aluminium Skirting Boards
Steel window reveals for a square set finish
Door trim kit to transform cavity sliders
The flush door jamb system
The two-piece recessed pelmet system
Custom rebates and capping made easy
The strong and versatile alternative for stop ends
The flush finish cavity slider solution