ISD | Premium Inswing Door Jamb
INVI Jamb® Inswing Door – ISD is the ultimate door jamb system to achieve a seamless look in hallways and corridors. Contrary to traditional door jambs, INVI Jamb ISD allows the door to swing open into the corresponding room, but can be installed flush in line with the wall face, hiding the appearance of doors along the wall. Take your project to the next level with the smooth finishes made possible with INVI Jamb ISD.
FEATURES
- Allow the door to be installed flush with the wall and open into the corresponding room.
- Wraps the plasterboard during framing to conceal fixings and incorporate the door into the wall face.
- Made from the world-renowned quality steel
- Simple to install and can be painted immediately.
- Complemented by INVI Hardware Hinges that are designed and tested to withstand heavy traffic flow.
- Available in full height or custom heights and widths.
Patent 2857622
FAQ
INVI Jamb is screw fixed to the jamb studs and header with flat headed screws (through the perforated sides) every 200mm into the wall stud, double screws in top corners and on hinges points, becoming a solid part of the wall structure.
INVI Jamb® is the original door jamb system that eliminates architraves, giving you that subtle, contemporary, clean line look. It’s durable, it’s affordable and is at home in commercial offices and showrooms, quality homes and public spaces like hospitals and schools.
- 1x Left hand door stile
- 1x Right hand door stile
- 1x Header
- 1x Head joiner (EZC only)
- Lift off channel (For EZC with Lift Off hinges only)
- Hardware kit including:
- Hinges
- 1x Latch plate
- 1x Plastic latch insert
- Hinge screws
INVI Jamb is fitted after the plaster lining has been installed, and has 35mm perforated sides for flush finishing with top coat into the walls, achieving clean architrave free lines around the doorway.
INVI Concept products are manufactured from zinc annealed steel and meet the finished surfaces standard AS/NZS 2311:2009 to ensure it can be painted immediately with standard wall paints, without any special preparation, so long as it is free of dust, dirt and oil.
Yes, architraves can be fitted, but the INVI Jamb concept is designed to create an ‘architrave-free’ opening.
INVI Jamb can be used with a variety of concealed and non-mortised hinges. Stainless Stainless steel INVI Jamb Herline hinges are provided with each door frame (lift off hinges are available if required).
Yes, INVI Jamb can be used with a solid core door. You will need to make sure that you are using the correct hinge and quantity to accommodate the door weight, making sure the hinge screws penetrate through to the timber stud behind the jamb, so that the weight of the door is swinging off the stud, and not off the INVI Jamb.
Plaster around the edges of the INVI Jamb will not crack if the INVI Jamb is installed according to the installation guide — i.e. must be screwed off every 200mm and double screwed at the hinge points and top corners. INVI Jamb then becomes an integral part of the wall.
Yes, custom made INVI Jambs are available with no header for full height doors.
10 -15 minutes depending on the installer.
Yes, masonry wall installation instructions are available contact sales@ezconcept.com.au for more details.
The manufacturer strongly recommends a timber stud or a 0.75 BMT metal stud on both sides of the opening.
EZC – The latch plate is surface mounted on the INVI Jamb Classic Adjust frame.
SRC – The latch plate is recessed into the frame for the INVI Jamb Single Rebate (SRC).
INVI Concept products are manufactured from highest quality zinc annealed cold-formed steel sections.
INVI Jamb frames are not welded and are clipped together using a unique INVI Jamb system that ensures an easy install and smooth finish.
- Key Features
-
FEATURES
- Allow the door to be installed flush with the wall and open into the corresponding room.
- Wraps the plasterboard during framing to conceal fixings and incorporate the door into the wall face.
- Made from the world-renowned quality steel
- Simple to install and can be painted immediately.
- Complemented by INVI Hardware Hinges that are designed and tested to withstand heavy traffic flow.
- Available in full height or custom heights and widths.
Patent 2857622
- Resources
- FAQ
-
FAQ
How is the INVI Jamb fixed?INVI Jamb is screw fixed to the jamb studs and header with flat headed screws (through the perforated sides) every 200mm into the wall stud, double screws in top corners and on hinges points, becoming a solid part of the wall structure.What is so Unique about the INVI Jamb Flush Door Jamb?INVI Jamb® is the original door jamb system that eliminates architraves, giving you that subtle, contemporary, clean line look. It’s durable, it’s affordable and is at home in commercial offices and showrooms, quality homes and public spaces like hospitals and schools.
What's included in the INVI Jamb frame kit?- 1x Left hand door stile
- 1x Right hand door stile
- 1x Header
- 1x Head joiner (EZC only)
- Lift off channel (For EZC with Lift Off hinges only)
- Hardware kit including:
- Hinges
- 1x Latch plate
- 1x Plastic latch insert
- Hinge screws
How is the architrave-free INVI Jamb fitted with plaster walls?INVI Jamb is fitted after the plaster lining has been installed, and has 35mm perforated sides for flush finishing with top coat into the walls, achieving clean architrave free lines around the doorway.
Do I have to use any special paint or preparation methods on INVI Concept products?INVI Concept products are manufactured from zinc annealed steel and meet the finished surfaces standard AS/NZS 2311:2009 to ensure it can be painted immediately with standard wall paints, without any special preparation, so long as it is free of dust, dirt and oil.
Can I fit architraves with the INVI Jamb system?Yes, architraves can be fitted, but the INVI Jamb concept is designed to create an ‘architrave-free’ opening.
What hinges should be used with INVI Jamb?INVI Jamb can be used with a variety of concealed and non-mortised hinges. Stainless Stainless steel INVI Jamb Herline hinges are provided with each door frame (lift off hinges are available if required).
Can INVI Jamb be used if I have a soild core door?Yes, INVI Jamb can be used with a solid core door. You will need to make sure that you are using the correct hinge and quantity to accommodate the door weight, making sure the hinge screws penetrate through to the timber stud behind the jamb, so that the weight of the door is swinging off the stud, and not off the INVI Jamb.
Will plaster crack around the edges of the INVI Jamb?Plaster around the edges of the INVI Jamb will not crack if the INVI Jamb is installed according to the installation guide — i.e. must be screwed off every 200mm and double screwed at the hinge points and top corners. INVI Jamb then becomes an integral part of the wall.
Can INVI Jamb be used in a doorway with no header?Yes, custom made INVI Jambs are available with no header for full height doors.
How long does it take to fit an INVI Jamb frame?10 -15 minutes depending on the installer.
Can INVI Jamb be used with masonry or brick walls?Yes, masonry wall installation instructions are available contact sales@ezconcept.com.au for more details.
What jamb studs do I use for the opening of an INVI Jamb?The manufacturer strongly recommends a timber stud or a 0.75 BMT metal stud on both sides of the opening.
Is the latch plate recessed into the frame?EZC – The latch plate is surface mounted on the INVI Jamb Classic Adjust frame.
SRC – The latch plate is recessed into the frame for the INVI Jamb Single Rebate (SRC).What material are INVI Concept products made from?INVI Concept products are manufactured from highest quality zinc annealed cold-formed steel sections.
Are your frames welded?INVI Jamb frames are not welded and are clipped together using a unique INVI Jamb system that ensures an easy install and smooth finish.
Explore the INVI Concept range
Hinges to perfectly complement INVI Jamb Door Jambs
Custom Riser Doors
Standard access panels
Aluminium Skirting Boards
Steel window reveals for a square set finish
The flush door jamb system
The two-piece recessed pelmet system
Custom rebates and capping made easy
The strong and versatile alternative for stop ends
The flush finish cavity slider solution
Door trim kit to transform cavity sliders